SA-200 is designed for the Marine Vessels mast or tall buildings that require long extra cables (up to 50 meters) without signal constraint to the GPS receivers.
Overview
SA-200 is the integration of the high performance GPS patch antenna and a state-of-the-art low noise amplifier into an extremely compact/fully waterproof enclosure and when connected to a GPS receiver with +5VDC antenna power it can provide excellent antenna signal amplification and out-band filtering with rejection for that receiver.
Specification
Physical Constructions:
|
Constructions:
|
Polycarbonate radome enclosure (top & bottom base with rubber O-ring inbetween) Center feeds TNC connector for antenna output
|
Dimensions:
|
4.5" in diameter & 2.9" in height
|
Weight:
|
220 grams (without cable)
|
Standard Mounting:
|
External flagpole mount (11cm-height threaded mast), an optional accessory kit
|
Optional mounting plate:
|
1. Cabin roof-mount with stainless steel base & shaft
2. Rail side mount with stainless rod
|
Cable & Connector:
|
Connector on the antenna:
|
TNC jack and other types are optional
|
Cable ( optional):
|
10 meters of RG58 A/U with TNC plug on one end and BNC plug on the other. 15~50 meters are available for options. Cable connectors are hermetically molded plastics for waterproof and stain relief.
|
Cable Pulling strength:
|
12Kg for 5sec.
|
Antenna Element:
|
Center Frequency:
|
1575.42 MHz +/-1.023 MHz
|
Polarization:
|
R.H.C.P. (Right Handed Circular Polarization).
|
Absolute Gain @ Zenith:
|
+5 dBi typical.
|
Gain @ 10° Elevation:
|
-1 dBi typical.
|
Axial Ratio:
|
3 dB max.
|
Output VSWR:
|
1.5:1 max.
|
Output Impedance:
|
50ohm
|
Low Noise Amplifier:
|
Center Frequency:
|
1575.42 Mhz +/- 1.023 Mhz
|
Power Gain:
|
28 dB typical
|
Bandwidth:
|
2 MHz min.
|
Noise Figure:
|
1.5 max.
|
Outer Band Attenuation:
|
20 dB min. @ Fo +/-50 MHz.
|
Supply Voltages:
|
4.0~6.0V DC
|
Current Consumption:
|
28+/-3mA
|
Output Impedance:
|
50ohm
|
Overall Performance: (antenna element, LNA & coax cable)
|
Center Frequency
|
1575.42 Mhz.
|
Gain:
|
27 dB typical
|
Noise Figure:
|
2.0 dB max.
|
Bandwidth:
|
2 MHz min.
|
Axial Ratio:
|
3 dB max.
|
VSWR:
|
1.5 max.
|
Output Impedance:
|
50ohm
|
Enviromental Condition:
|
Operating Temperature:
|
-40°C~ +85°C.
|
Storage Temperature:
|
-30°C~ +85°C.
|
Relative Humidity:
|
95% non-condensing.
|
Water Resistance:
|
100% waterproof.
|
This specification is subject to change without prior notice...