Product: hydraulic cylinder, barrel for plastic injection machine, cylinder for vessels, special-purpose applications. The easily-operation vertical double column deep hole honing machine and max. depth up to 6000mm.
• The Column type Deep hole drilling machine with CNC control are designed for drilling waterlines, Ejector pin holes of large type injection molds. • Spindle is supported by angular contact bearings well-lubricated to all running points in ...
1. Machines utilising the BTA Deep Hole Drilling System for solid deep hole boring 30–150mm in diameter. 2. Drilling depths up to 5000mm. 3. Coolant filtration to 30 microns. 4. The rigid honeycomb walled Bed gives a stable cutting ...
1. Machines utilising the BTA Deep Hole Drilling System for solid deep hole boring 30–150mm in diameter. 2. Drilling depths up to 5000mm. 3. Coolant filtration to 30 microns. 4. The rigid honeycomb walled Bed gives a stable cutting ...
1. Machines utilising the BTA Deep Hole Drilling System for solid deep hole boring 30–150mm in diameter 2. Drilling depths up to 5000mm. 3. Coolant filtration to 30 microns. 4. The rigid honeycomb walled Bed gives a stable cutting condition. ...
Knee type deep hole drilling machine: 1. Knee type Gun drilling machine with Fanuc CNC controller (Mitsubishi control are available). 2. This type machines are suitable for the production of waterlines, heat and ejector pinholes of injection ...
Knee Type Deep Hole Drilling Machine: 1. Knee type Gun drilling machine with Fanuc CNC controller (Mitsubishi control are available). 2. This type machines are suitable for the production of waterlines, heat and ejector pinholes of injection ...
Knee Type Deep Hole Drilling Machine: 1. Knee type Gun drilling machine with Fanuc CNC controller (Mitsubishi control are available). 2. This type machines are suitable for the production of waterlines, heat and ejector pinholes of injection ...
1. XE-XL & XLY type machines are suitable for the production of small & medium components shafts, mandrels. 2. Servomotor and Ball screw are used for the feed mechanism to insure smooth and convenient for feed rate adjust. 3. Hardened ...
1. XE-XL & XLY type machines are suitable for the production of small & medium components shafts, mandrels. 2. Servomotor and Ball screw are used for the feed mechanism to insure smooth and convenient for feed rate adjust. 3. Hardened ...
| Company Name : | Honge Precision Industies Corp. |
|---|---|
| Contact Person : | Mr. Edward Liu  |
| Address : | No. 11, Lane 66, Chung Hsiao Rd., Taichu |
| Country : |  Taiwan |
| Telephone : | 886-4-22856035 |
| Fax : | 886-4-22856048 |
