• The Column type Deep hole drilling machine with CNC control are designed for drilling waterlines, Ejector pin holes of large type injection molds.
• Spindle is supported by angular contact bearings well-lubricated to all running points in the head.
• The rigid honeycomb walled column gives a stable cutting condition. FC-32 castings have been stress relived and annealed.
• Hardened and ground double V-ways for worktable X-axis main slide to hardness HRC 60. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface.
• A huge wide and long worktable allows heavy work pieces. And extra wide saddle gives much heavier loading capacity.
• Automatic lubrication pump is provided as standard accessory to ensure all the bearing surface and screws are well lubricated.
• Spindle feed Z-axis and A-axis, feature P-grade linear motion guide way and provides stable cutting capacity.
• CNC could be selected with Fanuc or Mitsubishi brands.
• CE mark are available for special required.
Max. depth (Z) 1500 mm Spindle motor Fanuc α6/10000i Worktable horizontal(X) Fanucα12/3000i Drill spindle vertical (Y) Fanuc α12/3000i with brake device Drill spindle feed (Z) Fanuc α8/3000i High pressure pump motor 3~7.5 HP Speed Max. spindle speed 6000 rpm Drill Speed 10~ 150 mm / min Rapid 4000 mm / min Ball screw for feeds Spindle infeed(Z) Ø40 x P10 x C5 Spindle vertical feed Ø50 x P10 x C5 Worktable horizontal feed Ø50 x P10 x C5 Spindle Head Auxiliary slide(A) Ø40 x P10 x C3 Spindle feed horizontal Z axis and Spindle Head Auxiliary slide(A) Max. loading capacity 8000 kgs Table size 1200 x 1700 mm Stroke of worktable horizontal(X)1400 mm Stroke of spindle vertical(Y) 1000 mm High pressure pump Pump output 40 Liter / min Max. pressure 100 kgs / cm² Coolant tank 1200 L (outside of machine body) Controller Type Fanuc 0iMC / Mitsubishi M645 (Absolute system) Controlled axes X,Y,Z- 3 axes( X,Y, axes simultaneously) Mix. setting unit 0.001 mm Interface RS232 Floor space 5500 x 4500 Net weight 16000kgs Standard accessories 1. High pressure coolant pump 2. Automatic lubricator 3. Tool box with tools Optional accessories 1. Magnetic separator + Paper filter unit 2. Chip conveyor 3. Coolant cooler 4. Gundrill grinder 5. 4th axis rotary table 6. Auxiliary Milling & Tapping Head 7. Fanuc 18i controller 8. CE Certificate
Taiwan
