CHANG I IN CO.,LTD.

Plywood Edge Trimming Saws (Wood Panel Cutting Saws)

Product Name :: Plywood Edge Trimming Saws (Wood Panel Cutting Saws)

Model No :: CI-TS

Description
Specification

Specification：

◎ PLC Control System, Man machine interface operation and monitoring

FEATURES：

1. For longitudinal cutting and cross cutting, this machine is provided with 8 pieces each of precision rolls which are as large as 150mm in diameter, making it possible to accurately perform the powerful and high - speed feeding of plywood.

2. The air cylinder is installed for the upper-feed roller. Therefore, the uniform and stable pressure is given on the plywood for further accuracy in feeding.

3. In order to match the high-speed feeding, the saw shafts revolve at the speed as high 7,000R.P.M.The bearings higher in accuracy are used in the precision saw shaft cases; the special belts for high speed operation are adopted for the driving with motor; and other consideration in detail is also given to the design for manufacture;

4. For deciding the cutting width, the right saw shaft case and the left saw shaft case are moved by motor driving at the same time.

5. The auto pusher is installed for auto magically feeding the plywood, which is cut with the longitudinal cutting saw, at a right angle to the cross cutting saw.

4' x 8' Plywood Sizer (Double Saws)

5' x 10' Plywood Sizer (Double Saws)

4' x 8' Plywood Automatic Double Saws Specification

MODEL		CI-TS4	CT-TS8
Cuttable size		750-1,250mm	1,250-2,500mm
Thickness cuttable		3-25mm	3-25mm
Circular saws(Dia.×No.)		350mm×2sets	350mm×2sets
R.P.M of Circular saws		7,000 r.p.m	7,000 r.p.m
Feeding speed(stepless)		25-100 m/min	25-100 m/min
Motor for	For elevating upper roll	0.75kw×4p×1/30	0.75kw×4p×1/30
	For Circular saws	5.5kw×2p 3sets	5.5kw×2p 3sets
	For Feeding	2.2kw×4p	3.7kw×4p
	For positioning width	0.4kw×4p×1/30	0.4kw×4p×1/30

5' x 10' Plywood Automatic Double Saws Specification

MODEL		CI-TS5	CI-TS10
Cut table size		1,200-1,600mm	2,400-3,110mm
Thickness cuttable		3-25mm	3-25mm
Circular saws(Dia.×No.)		350mm×2sets	350mm×2sets
R.P.M of Circular saws		7,000 r.p.m	7,000 r.p.m
Feeding speed(step-less)		25-100 m/min	25-100 m/min
Motor for	For elevating upper roll	0.75kw×4p×1/30	0.75kw×4p×1/30
	For Circular saws	11kw×2p 3sets	11kw×2p 3sets
	For Feeding	2.2kw×4p	3.7kw×4p
	For positioning width	0.4kw×4p×1/30	0.4kw×4p×1/30

Related Prodcuts From This Supplier

Hydraulic Table Lifter (Scissor Lifter)

Spring Tension for core builder

conveyor belt

Veneer Composer (Veneer Core Builder)

Meinan Nose Bar

Contact us

Company Name :	CHANG I IN CO.,LTD.
Contact Person :	Mr. Hsu Shun-Hao
Address :	Building. G, 257F., Dahan Rd., Daliao Dist.,
City :	Kaohsiung
Province / State :	Kaohsiung City
Country :	Taiwan
Website :	http://www.changi-machinery.com.tw/
Telephone :	886-7-7031896
Fax :	886-7-7032762