An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
1. O-ring: (1) AS568A, metric, JIS B2401. (2) All type of materials. (3) Smallest 0.5 mm ID x 0.5 mm C/S. (4) Largest OD=800mm. 2. Hydraulic seals: (1) Rubber materials. (2) Rod seals, piston seals, wipers, cushioning seals, rotary ...
1. Various materials and hardness for customer's option, include FKM, Nitrile, EP, silicone, ACM, flour silicone, alfas, polyurethane, neoprene, etc. 2. All o-rings are made according to international standard: ISO 3601, AS 568A, DIN 3771, ...
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
| Company Name : | Best Ring Industrial Corporation |
|---|---|
| Contact Person : | Mr. Paul Hsiao  |
| Address : | No. 36, Lane 148, Li De St., Chung Ho Di |
| Country : |  Taiwan |
| Telephone : | 886-2-32349977 |
| Fax : | 886-2-32349288 |
