Contact us
Company Name : | Best Ring Industrial Corporation |
---|---|
Contact Person : | Mr. Paul Hsiao ![]() |
Address : | No. 36, Lane 148, Li De St., Chung Ho Di |
Country : | ![]() |
Telephone : | 886-2-32349977 |
Fax : | 886-2-32349288 |
1. Products can resistance high-temperature, resistance low-temperature, resistance ozone, resistance chemical solvent, resistance oil, resistance abrasion, resistance compression. 2. FDA approved, products can: isolation, fireproof, ...
1. Compression, transfer, and injection molding, extruding, lathe cutting, stamping and other fabricating services. 2. Various materials and hardness for all kinds of application NR, SBR, ACM, EPDM, NBR and so on, depending on customer's ...
1. The most inexpensive and economical sealing element. 2. All major compounds are available.
O ring kits: 1. The most inexpensive and economical sealing element. 2. All major compounds are available. 3. All o-rings are made according to international standard. 4. ISO3601, AS568A DIN3771, BS1806. 5. Cords are produced by extrusion.
1. Durometers from 50-80. 2. Non-standard colors available. 3. It can be supplied in the following standard materials: Nitrile, FKM, silicone, EPDM and Neoprene.
1. O-ring: (1) AS568A, metric, JIS B2401. (2) All type of materials. (3) Smallest 0.5 mm ID x 0.5 mm C/S. (4) Largest OD=800mm. 2. Hydraulic seals: (1) Rubber materials. (2) Rod seals, piston seals, wipers, cushioning seals, rotary ...
1. Various materials and hardness for customer's option, include FKM, Nitrile, EP, silicone, ACM, flour silicone, alfas, polyurethane, neoprene, etc. 2. All o-rings are made according to international standard: ISO 3601, AS 568A, DIN 3771, ...
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
An o ring is a loop of elastomer with a round (o-shaped) cross-section used as a mechanical seal or gasket. They are designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
Company Name : | Best Ring Industrial Corporation |
---|---|
Contact Person : | Mr. Paul Hsiao ![]() |
Address : | No. 36, Lane 148, Li De St., Chung Ho Di |
Country : | ![]() |
Telephone : | 886-2-32349977 |
Fax : | 886-2-32349288 |