The Best of Made in Taiwan
A-133 is an active GPS antenna without housing, aluminum base and a power protection circuit built-in to protect the active low noise amplifier (LNA), and the host GPS receiver at the connector end from the danger of shorting. (Note: GPS receiver front-ends can be destroyed or de-graded by external antennas over-loading or shorting).
A-131 is a performance GPS antenna with power and RF signal protection built-in to protect the active low noise amplifier (LNA) and the host GPS receiver at the connector end from danger of shorting, (GPS receiver front-ends can be destroyed or de-graded by external antennas over-loading or shorting). The RF signal protection shield on the bottom ...
Frequency range: VHF+UHF 170~240Mhz with 480~860Mhz.
Frequency range: VHF+UHF 170~240Mhz with 480~860Mhz.
Frequency range: VHF+UHF 170~240Mhz with 480~860Mhz.
Because of its unique 10 watt RF protection design, A-111 is the most suitable GPS antenna for using in a server environment.
Option. OEM hardware. 1. Open frame antenna, with RF shield. 2. Open frame with 3" flanges & shield. 3. ANT + aluminum base.
1. Frequency range: VHF+UHF 170-240 & 480-860 MHz. 2. Peak gain: 0 dBi. 3. VSWR: 2.0:1. 4. Impedance: 75 ohm. 5. Polarization: linear horizontal. 6. Connector: MCX/F/IEC/SMA. 7. Cable: RG174-5M. 8. LNA gain: 20dB.
A-132 GPS flange antenna: A-132 is a low profile GPS flange antenna with RF signal protection shield on the bottom and a 3-inch aluminum flange disk for strengthening the GPS signal reception. It is equipped with 3 signal noise filters and 2-stage LNA, which will provide the most accurate signal to GPS devices.
ACTIVE-33 is a low profile GPS active antenna system for the next generation multi-purpose GPS mobile antenna products for Telematics, Fleet Management, Navigations and AVL applications. This small print size of the antenna design does not reflect over-all performance, since the antenna itself needs no ground plane aid to deliver the L1 ...
Taiwan 
