Ceramic Conveyor Shaft Bearings
Model : N/A1. Material: ceramic. 2. Suitable for wet process equipment.
1. Material: ceramic. 2. Suitable for wet process equipment.
8mm ceramic base metal film and base carbon film: 1. 8mm round/ single-turn/ cermet industrial/ open frame. 2. Cross slot adjustment options. 3. Horizontal and vertical mounting styles. 4. PC board stand-offs and retention. 5. Front and top adjust styles. 6. Dust resistant and splash resistant covers.
Chilisin offers hundreds of multi-layered ferrite chip beads with various sizes, frequency characteristics, and a wide range of impedance values to provide powerful solutions for EMI problems. Three formulas of ferrite compose several types of EMI suppression chip beads that are classified into six categories- SB, GB, PB, UPB, NB, and HF series.
1. Specifications: temperature characteristics (1) NPO: 0+30 ppm/℃. (2) X7R: +15%. (3) Z5U/Y5V: +22%, -82%. 2. Specifications: operating temperature range (1) NPO: -55 to +125. (2) X7R: -55 to +125. (3) Z5U/Y5V: -30% to + 85℃. 3. Specifications: dissipation factor (25, 1khz) (1) NPO: 0.15% max at 1 KHz 1 VRMS max (1 MHz for 100pF or less). (2) X7R: ...
Features: 1. Ultra miniature size external dimmensions of 3.2(w) x 4.5(l) x 1.7(t)mm. 2. Designed for reflow soldering. 3. Very good quality and high resonant frequency. 4. Color coded permits easy identification.
1. Bulk and taping package (diameter 10 w/m and under) are available. 2. The lead spacing for taping package is 2.5w/m (straight leads) and 5w/m (straight and inside-kink leads). 3. If working voltage is higher than 3K VDC, capacitors shall be coated with flame-retardant epoxy in blue color.
Application for: 1. Transistor, diode, IC, thyristor and triac semiconductor. 2. Surge protection in consumer electronics. 3. Surge protection in industrial electronics. 4. Surge protection in communication, measuring and controller electronics. 5. Surge protection in electronic home appliances, gas and petroleum appliances. 6. Electrostatic discharges and noise ...
1. Small size & high capacitance. 2. Suitable for reflow soldering. 3. Surface mount. 4. The X2/Y3 & X1/Y2 specially designed for use in modem, facsimile, telephone and other electronic equipment for lighting and surge protection, EMI filteration and lsolation. 5. Safety standard approval by EN 132400 + A4:01 an UL 60950. 6. Certificate number: by TUV ...
The NPO (COG) is a high Q, low K temperature compensating type of dielectric with stable electrical properties under varying voltage, temperature, frequency and time. It's suitable for circuits that require low lost, as well as timing and tuning applications. The X7R has moderate K value and is temperature stable. It shows moderate change in electrical properties under ...
1. The NPO (COG) is a high Q, low K temperature compensating type of dielectric with stable electrical properties under varying voltage, temperature, frequency and time. It's suitable for circuits that require low lost, as well as timing and tuning applications. 2. The X7R has moderate K value and is temperature stable. It shows moderate change in electrical properties ...