Specifications
|
Technology
|
Standard
|
3GPP Release 11/12 Long Term Evolution (LTE), fallback 3GPP Release 7,8,9 for HSPA/UMTS
|
|
IEEE 802.11ac wireless local area network (WLAN), Backward support 802.11n/g/a/b Wireless LAN
|
|
IEEE 802.3 10Base-T Ethernet
|
|
IEEE 802.3u 100Base-TX Fast Ethernet
|
|
IEEE 802.3ab 1000Base-T Gigabit Ethernet copper
|
|
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
|
|
IEEE 802.1Q for VLAN
|
Interface
|
Ethernet Port
|
2 x 10/100/1000MBase-T RJ45, Auto Negotiation, Auto-MDI/MDIX
|
System LED
|
1 x PWR: Green On
1 x SYS: Ready: Green On, Firmware Updating: Green Blinking
1 x DO: Red On
2 x Ethernet Ports: Link: Green On, Activity: Green Blinking
2 x Serial Ports (Serial 1/2, by model): Activity: Green Blinking
6 x Radio (Ra, Rb, Rc, Rd, Re, Rf): Radio status
Ra: AP mode: Green On, Station mode connected: Green Blinking, Station mode/radio disable: Off
Rb/Rc: Reserved
Rd: SIM detected: Green On, SIM not inserted: Off
Re: 4G connection: Green On, 2/3Gconnection: Green Blinking, disconnected: Off
Rf: Base Station connected: Green On for 2 sec period, Base station disconnected: Green Off for 2 sec period
|
USB
|
1 x USB for Configuration/Firmware Update
|
Reset
|
System Reset(2~6 Seconds) / Default Settings Reset (over 7 Seconds)
|
SMA Socket
|
Up to 5 xRP-SMA Female
Wi-Fi 2T2R: ANT1 for Wi-Fi1, ANT2 for Wi-Fi2,
LTE 2T2R: ANT3 for LTE Main, ANT5 for LTE Aux
GPS: ANT4
|
SIM Socket
|
2 x Nano SIM with redundancy
|
Micro SD
|
(Only for E Series)
1 x for field diagnostic data logging
|
Serial
|
Up to 2 x RS232/422/485, DB9
|
Power Input, Digital Output
|
6-Pin Removable Terminal Block Connector
4 Pin for Redundant Power
2 Pin for DO (Relay Alarm)
DO: Dry Relay Output with 1A /24V DC
|
Cellular Properties (LTE Cat.6)
|
Standard
|
UMTS/HSPA 3GPP Release 8
LTE 3GPP Release 12 (LTE Cat.6)
|
Data Rate
|
TD-SCDMA: DL Max. 4.2 Mbps, UL: Max.2.2 Mbps
HSPA: DL: Max. 42 Mbps, UL: Max. 5.76 Mbps
WCDMA: DL: Max 384 Kbps, UL: Max 384 Kbps
LTE-FDD: DL: Max. 300 Mbps, UL: Max. 50 Mbps, 2x2 DL MIMO
LTE-TDD: DL: Max. 226 Mbps, UL: Max. 28 Mbps, 2x2 DL MIMO
|
Band Information: LTE-E
|
LTE-FDD: B1/B3/B5/B7/B8/B20/B28
LTE-TDD: B38/B40/B41
WCDMA: B1/B3/B5/B8
|
Band Information: LTE-U
|
LTE-FDD: B2/B4/B5/B7/B12/B13/B17/B25/B26/B30/B66
LTE-TDD: B41
WCDMA: B2/B4/B5
|
Cellular Properties (LTE Cat.4)
|
Standard
|
GSM/GPRS/EDGE 3GPP Pelease 6
UMTS/HSPA 3GPP Release 8
LTE 3GPP Release 11
|
Data Rate
|
GPRS: DL: max. 85.6 kbps, UL: max.85.6 kbps
EDGE: DL: max. 236.8 kbps, UL: max. 236.8 kbps
HSPA: DL: max. 42 Mbps, UL: max. 5.76 Mbps
LTE-FDD Cat.4: DL: max. 150 Mbps, UL: max. 50 Mbps, 2x2 DL MIMO
LTE-TDD Cat.4: DL: max. 130 Mbps, UL: max. 35 Mbps, 2x2 DL MIMO
|
Band Information: LTE-E
|
LTE: FDD B1/B3/B7/B8/B20/B28A
LTE: TDD B38/B40/B41
WCDMA: FDD B1/B8
GSM: B3/B8
|
Band Information: LTE-G
|
LTE: FDD B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28
LTE: TDD B38/B39/B40/B41
WCDMA: FDD B1/B2/B4/B5/B6/B8/B19
GSM: B2/B3/B5/B8
|
Band Information: LTE-U
|
LTE: FDD B2/B4/B12
WCDMA: B2/B4/B5
|
Band Information: LTE-CN
|
LTE FDD: B1/B3/B5/B8
LTE TDD: B38/B39/B40/B41
TD-SCDMA: B34/B39
WCDMA: B1/B8, CDMA: BC0
GSM: 900/1800MHz
|
Wi-Fi Properties
|
Standard
|
IEEE 802.11ac/a/b/g/n, 2T2R MINO
802.11ac: OFDM (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM)
|
Data Rate
|
802.11ac: MCS0~9, max. 866Mbps
802.11b: 11Mbps / 802.11a/g: 54Mbps / 802.11n: MCS0~15, max.300Mbps
Check detail TX/RX information in User Manual
|
Frequency
|
ISM Band, 2.412GHz~2.472GHz, 5.180MHz~5.825MHz(Band 1,4)
|
RSSI
|
≦20db/≦23db, compliant with CE 2.4G/5G request
|
GPS Properties
|
GNSS
|
GPS/GLONASS/BeiDou/Galileo
|
Performance
|
Cold start: 18s, Warm start: 2.2s, Hot start: 1.8s
|
Sensitivity
|
Cold start: -146dBm, Reacquisition: -157dBm, Tracking: -157dBm
|
Accuracy
|
< 1.5M
|
GNSS Frequency
|
GPS/Galileo: 1575.42±1.023 MHz
GLONASS: 1597.5~1605.8 MHz
BeiDou: 1561.098±2.046 MHz
|
Antenna
|
Frequency range: 1561~1615MHz
Polarization: RHCP or linear
VSWR: <2 (Typ.)
Passive antenna gain: >0dBi
|
Software
|
Network Protocols
|
TCP/IP, UDP, DHCP, Telnet, DNS, SNMP, HTTP, HTTPS, SMTP,NTP,ARP, ICMP,DDNS
|
Management Interface
|
CGI WebGUI, Command Line Interface (CLI), IPv4/IPv6*, Telnet, SNMP v1/v2c/v3, DDNS, DHCP server/client, DHCP Relay, TFTP, System Log, SMTP, ARP response over 802.2 LLC SNAP, Proxy ARP, DNS (client/proxy), PPPOE*
|
Filter
|
IEEE802.1Q VLAN
|
User Management
|
Radius client, TACACS+, local database
|
Serial communication
|
TCP Server/TCP Client/UDP mode, TCP Alive check, Force TX Delimiter.Timeout/interval/length, Long Distance Termination
|
Time Management
|
NTP, SNTP, Cellular Time
|
IoT
|
AWS Agent, Azure Agent, ThingMaster Agent
|
Network Management
|
IPv4, SNMP v1/v2c/v3/Trap, MIB II, Entity MIB, DHCP server/client, DHCP relay*, TFTP, ARP response over 802.2 LLC SNAP, Proxy ARP, DNS (client/proxy)
|
Traffic Management
|
Flow Control*, Traffic shaping
|
WAN / Routing / NAT/
Firewall / VPN
|
Routing: RIPv2, OSPFv2, VRRPv2
NAT: 1-1 NAT, NAPT(SNAT/DNAT), Port Forwarding, DMZ
Firewall: Stateful Inspection firewall, IP/Port Filter
VPN: IPSec, OpenVPN (Multipoint VPN), L2TP, GRE, PPTP, MGRE*
|
Security
|
IEEE 802.1X/RADIUS, TLS v1.2, HTTPs/SSH, First login password management
WLAN AP Security: Share Key, WPA/WPA2-PSK(Pre-Shared Key), WPA/WPA2 Enterprise
Encryption: 64/128-bit WEP(Wired Equivalent Privacy), TKIP(WPA-PSK), AES(WPA2-PSK), MAC Filter
|
Advanced Security
|
TACACS+, Multi-user authentication
|
Redundancy Protocol
|
WAN/LTE Redundancy, Rapid Spanning Tree Protocol (RSTP)
|
IIoT Industrial Protocol
|
Modbus RTU, MQTT, RESTful API
|
Private Cloud
|
ThingsMaster, ThingsMaster OTA
|
Public Cloud
|
AWS Agent, Azure Agent
|
Location
|
Google map, Baidu map
|
MIB
|
MIB-II, Entity MIB, WoMaster Private MIB for monitoring
|
Utility
|
ViewMaster, NetMaster, Ping, Traceroute, IP SLA*
|
Serial communication
|
TCP Server/TCP Client/UDP mode, TCP Alive check, Force TX Delimiter/Timeout/interval/length, Long Distance Termination
|
Cellular Configuration
|
Radio on/off, 2G, 3G and 4G modes configurable, SIM Security, Connection Status, Cellular to Eth-WAN Redundancy, GPS positioning (by model), Backup SIM Retry (1-10 times)
|
WLAN Configuration
|
WLAN Basic Settings: Radio on/off, AP/client mode, 2.4G 11n/5G 11ac Band and Frequency selection, SSID/Multi-SSID configuration, SSID broadcast, VLAN ID, WLAN to LAN Link fault pass-through*, Cellular to WLAN Auto Offload, and advanced WLAN settings, 802.1X
|
Power Requirement
|
Input Voltage
|
24V(12~48VDC)
|
Reverse Polarity Protect
|
Yes
|
Input Current
|
0.26A@24V
|
Power Consumption
|
Max 6.24W@24VDC full traffic, suggest reserving 15% tolerance
|
Mechanical
|
Installation
|
DIN-Rail
|
Enclosure Material
|
Steel Metal with Aluminum
|
Dimension
|
50(W) x 151(H) x 120(D) mm / without DIN Rail Clip
|
Ingress Protection
|
IP30
|
Weight
|
≒660g without package
|
Environmental
|
Operating Temperature & Humidity
|
-40°C~75°C, 5%~95% Non-Condensing
|
Storage Temperature
|
-40°C~85°C
|
MTBF
|
>200,000 hours
|
Warranty
|
5 years
|
Approval
|
Safety
|
EN 62368-1:2014/AC:2017
|
EMC
|
Railway Roadside EN 50121-1/4, EN61000-6-4
EN61000-4-2 ESD, EN61000-4-3 RS, EN61000-4-4 EFT, EN61000-4-5, EN61000-4-6 CS,
EN61000-4-8 Magnetic Field
EN61000-4-12/16/17/18/29 for power application
|
CE
|
CE RED Compliance
Safety: EN 62368-1
EN 62311 MPE assessment
EN 301 489-1/17/19/52, EN 55032/55024
EN 300 328/EN 301 893*, EN 301 908-1*
|
FCC
|
FCC part 15B Class A Compliance, FCC Approved LTE/WLAN Module
|
Environmental
|
Shock/Vibration: EN 50155:2017/EN 61373:2010 Railway Shock/Vibration
Shock: IEC60068-2-27 Compliance
Freefall: IEC60068-2-31 Compliance
Vibration: IEC 60068-2-6 Compliance
|