|
MBD-X11SAE-F
|
|
|
|
Form Factor
|
|
Dimensions
|
-
12" x 9.6" (30.48cm x 24.38cm)
|
|
|
CPU
|
-
Intel® 6th/7th Generation Core™ i3 series, Intel® 6th/7th Generation Core™ i5 series, Intel® 6th/7th Generation Core™ i7 series, Intel® Xeon® processor E3-1200 v6/v5.
-
Socket H4 (LGA 1151) supported, CPU TDP support Up to 95W TDP
-
A graphic integrated CPU is needed to have on-board video from DVI and DP ports. Examples: E3-1235L v5, E3-1275 v5
|
Note
|
-
BIOS version 2.0 or above is required to support 7th Generation Intel® Core™ i3 Processors and Intel® Xeon® Processor E3-1200 v6 series
|
|
|
Memory Capacity
|
-
Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2400MHz, in 4 DIMM slots
-
4x 288-pin DDR4 DIMM slots, Up to 64GB DDR4 ECC UDIMM
|
Memory Type
|
-
2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
|
DIMM Sizes
|
|
Memory Voltage
|
|
Error Detection
|
-
Corrects single-bit errors
-
Detects double-bit errors (using ECC memory)
|
|
|
Chipset
|
|
SATA
|
-
Intel® C236 controller for 8 SATA3 (6 Gbps) ports; RAID 0,1,5,10
-
+ 1 PCI-E M.2(PCI-E x4, 2242/2260/2280)(No Raid support)
|
IPMI
|
-
OOB Bios refresh function is not supported
|
Network Controllers
|
-
Single LAN with Intel® Ethernet Controller I210-AT
(Share with IPMI)
Single LAN with Intel® PHY I219LM LAN controller
|
Audio
|
|
Graphics
|
-
Aspeed AST2400 BMC
-
***VGA is for IPMI only***
|
|
|
USB
|
-
6 USB 2.0 ports (2 rear + 4 headers)
-
6 USB 3.1 Gen1 ports (2 Rears Type A, 4 headers)
-
2 USB 3.1 Gen2 ports , 2 Type A)
|
Video Output
|
-
1 DVI - D port, 1 DP (DisplayPort) port, 1 HDMI port, 1 VGA port,
-
***VGA is for IPMI only***
|
Serial Port / Header
|
|
TPM
|
|
|
|
|
PCI-E
|
-
2 PCI-E 3.0 x16,
-
2 PCI-E 3.0 x12 - 5V PCI 32bit
-
***2 PCI-E x16 slots are running at x16/NA or x8/x8 ***
|
M.2
|
-
M.2 Interface: 1 PCI-E 3.0 x4
-
Form Factor: 2242/2260/2280
-
Key: M-Key
|
|
|
BIOS Type
|
|
BIOS Features
|
-
Plug and Play (PnP)
-
DMI 2.3
-
PCI 3.0
-
ACPI 5.0
-
USB Keyboard support
-
Hardware BIOS Virus protection
-
SMBIOS 3.0
-
UEFI 2.3.1
-
RTC (Real Time Clock) Wakeup
|
|
|
Software
|
-
IPMI2.0, SPM, SuperDoctor® 5, Watchdog
|
Power Configurations
|
-
ACPI Power Management
-
Keyboard Wakeup from Soft-Off
-
CPU Fan auto-off in sleep mode
-
Power-on mode for AC power recovery
|
|
|
Voltage
|
-
+12V, +3.3V, +5V, +5V standby, Chassis intrusion header, Monitors CPU voltages, VBAT
|
FAN
|
-
5x 4-pin fan headers (up to 5 fans), Fan speed control, Overheat LED indication
|
Temperature
|
-
CPU thermal trip support, I2C temperature sensing logic, PECI, Thermal Monitor 2 (TM2) support
|
LED
|
-
CPU / System Overheat LED, Suspend static indicator LED, UID/Remote UID
|
Other Features
|
-
8-pin 12v DC power connector, ACPI power management, ATX Power connector, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Intel Smart Response Technology, WOL
|
|
|
Operating Temperature Range
|
-
0°C ~ 50°C (32°F ~ 122°F)
|
|