● Flow velocity range : 0...12 m/s
● Be applicable sewage, wastewater, chemical plants, food factory application
● IP68 enclosure that can be used for underground applications
● FEP liner suitable in vacuum tube
● High accuracy of ±0.5% of reading
● Empty pipe, current excitation
High accuracy for a wide range of process conditions
FEM06 Electromagnetic Flow Meter is a flange type electromagnatic flow meter ideal for conductive liquids. It comes in sizes from 15 ... 800 mm flow tubes.
Electromagnetic Flow meter is widely used for tap-water, waste water, food & beverage pulp & paper and many other applications.
Can be is a stand alone magmeter that could also be used with various configurations, such integral or remote and AC or DC power requirement. RS-485 communications are available.
More potential product articles, welcome to visit the link below
Diameter : 15 ... 800 mm ( 1/2" to 32" )
Range : Velocity 0 ... 0.25 m/s min. ; 0 ... 12 m/s max.
Material : Measuring Tube : Stainless Steel 304，Flange : Cabon Steel(Standard) ; Stainless Steel 304(Option)，Housing : Carbon Steel ( Standard ) ; Stainless Steel 304 ( Option )
IP rating : IP65(Compact / Remote version), IP68(Remote version, with 10 m cable)
Conductivity : To be more than 20 μS/cm
Power Supply : DC 24 V, AC AC 100 ... 240 V
Output : 4...20 mA / Pulse ; 4...20 mA / Pulse＋RS-485
Electrode : SUS316L；Hastelloy；Titanium alloy；Tantalum alloy
Flange type : DIN 1.0Mpa；ANSI 150#RF；JIS 10K
Operating / Ambient Temp.：Operating：≦80°C / ≦120°C(Remote version)；Ambient：-25 ... +65°C
Accuracy( Velocity ≧ 0.3 ... 12 m/s ) : ± 0.5% of reading(15 ... 600 mm)，1 % of reading(700 ... 800 mm)
Operating pressure：4.0 Mpa：Max. pressure with flanges(15 ... 150 mm)，2.5 Mpa：Max. pressure with flanges(15 ... 600 mm)，1.6 Mpa：Max. pressure with flanges(15 ... 800 mm)
eYc Flow meter requirements questionnaire PDF download.
*Please make sure the product and the device which connect with RS485 are on common ground, avoid damaged product.
The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect. Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect.
High viscous fluids / Corrosive and abrasive liquids process industry, waste water treatment, chemical industry, steel industry, mining,pulp & paper, irrigation, power generation.