LAMIX is a design of ultra-thin head in combination with micro screws. Features: LAMIX is a design of ultra-thin head in combination with micro screws. Height of LAMIX head is reduced to as small as 0.2 mm, 77% smaller ...
Thread of POWERLOK is TAPTITE (triangular) shape, and it's designed to be the combination of thread angle of 30/60 deg., which gives an excellent vibration proof and shock resistance by improving the lock action due to external threads ...
S-tite is a trilobular thread forming screw Features: S-TITE is a trilobular thread forming screw which eables ideal screw tapping and screwing thanks to a triangle section of threaded part, sharply improving working ...
CUP SCREW has a flanged head with cup shape which has same function with spring lock washer. Features: CUP SCREW has a flanged head with cup shape which has same function with spring lock washer. By making the flange in ...
STRUX is a self-clinching stud of pressurized mounting system Features: STRUX is a self-clinching stud of pressurized mounting system, to take the place of the conventional clinching stud and welded stud. STRUX realizes total cost ...
Washer assembly screw achieves saving of labor and assembling cost, because of pre-assembled washer. The combination of screw and washer is available as required depending on the purpose of use. Also suitable for automated ...
LAMIMATE 為一款輕薄頭部設計，可使頭部貼近於鎖付件平面，可有效減少體積及重量。 特點: 1) LAMIMATE 有助削平鎖付面， 亦能削減產品厚度。 2) 採用 LAMIMATE 超薄頭設計，不須其他對應方法支援頭部削減。 3) LAMIMATE 適用於產品外觀面，除美觀外觸感亦相當平滑。 應用: 1) 當對現行螺絲之頭形感到不滿時， LAMIMATE 為一最佳解決方案。 2) 當有美關要求時， LAMIMATE ...
FIT-TITE provides a higher loose-proof effect due to the increased number of contact points . Features: 1) Because it is well considered about torque which relates interfering with inner diameter of female thread, ...
AUTOCROSS has a special drive unit(recess) that improves driver bit insertability Slopes in the drive unit helpput in the bit and reduce work troubles that may occur during insertion. It does a tremendous job in fastening works by ...
The special design of RS-TITE is a thread forming screw in the shape of a triangle at the tip but circular at the body under the neck. RS-TITE supports improvement of work efficiency and quality with smooth screw fastening and high ...
| Company Name : | SHIHO SCREW INDUSTRIAL CO., LTD. |
|---|---|
| Address : | No.12, Yongchun St., Xiaogang Dist., Kaohsiung City 81266, Taiwan (R.O.C.) |
| Country : |  Taiwan |
| Website : | http://www.shihoscrew.com |
| Telephone : | 886-7-871-3198 |
| Fax : | 886-7-871-5363 |
