1. The machine adopts PLC and touch screen for controlling the mould opening, mould closing, material feeding, steaming, temperature keeping, vacuum cooling, de-moulding and ejecting.
2. The machine adopts high-efficient vacuum system and condensate device to improve moulding speed and reduce the moisture content. Vacuum supported machine is very efficient for making high-density and thick blocks.
3. The machine is welded from high-quality profile steel, through heat treatment, ensuring high strength of the machine without deformation, and possibility of bearing the expansion force of the high-density product.
4. Adopting advanced moulding technical, thee machine is applicable to produce high-density and low-density block and ensure same quality of inside and outside block.
5. The mould cavity surface is coated with Teflon, ensuring easy de-mould and good finish of the block.
6. Block conveying line and electronic weighing scale for machine is optional.
1. Mould specification: 6090 x 1240 x 1040mm.
2. Product specification: 6000 x 1200 x 1000mm.
3. Steam:
(1) Entry: Φ150.
(2) Consumption: 100 - 130kg/ cycle.
(3) Pressure: 0.6 ~ 0.8Mpa.
4. Compressed air:
(1) Entry: Φ100.
(2) Consumption: 2 - 2.5M3/ cycle.
(3) Pressure: 0.6 ~ 0.8Mpa.
5. Drainage: Φ150mm.
6. Vacuum drainage: Φ125mm.
7. Condensation water drainage: Φ150mm.
8. Electric power:
(1) Power: 35.5kw,
(2) Consumption: 18kw/ h.
9. Material conveying pipe: Φ80mm.
10. Production efficiency: 15g/ l: 8min/ cycle.
11. Overall dimension (L x W x H): 12800 x 4000 x 3000mm.
12. Weight: 14,500kg.
13. Room height required: 6000mm.
China
