BM-560T was designed for toolmakers & Job shop machining, rigid meehanite casting with ample ribs construction and stress relieved for excellent stability, hardened and ground of slideways Turcit-B lined on all Slideways & Gibbs and precision hand scraped for perfect alignment and smooth traverse, 7.5 HP vector inverter drives for programmable spindle speed and ISO #40/4500rpm, swivel ±45° (R & L) by worm gear and tied up with 4 off screws, manual quill with 140 mm travel and with hi-low back gears for heavy cutting, the large Ø40 mm of precision ground ball-screw with double nuts on 3-axes and mounted on both of end, the AC brushless axes servo motors & drives to provide accurate traverse and maintenance-free, X-Y-Z axes & quill Travel : 1300 x 600 x 635 & 140 mm, table size : 420 x 1600 mm and 800 kgs table load capacity.
1. Travel:
Spindle center to column: 635 mm (25").
Spindle nose to tabletop: 110 - 710 mm.
Vertical travel (z-axis): 610 mm (24").
Cross travel (y-axis): 610 mm (24").
Longitudinal travel (x-axis): 1300 mm (51").
2. Table:
Max. table loading capacity: 800 kg.
t-slots (width x no x patch): 16 x 5 x 100 mm.
Table size: 420 x 1600 mm (16.5" x 63").
3. Spindle:
Spindle taper: NT 40.
Spindle speed range (standard): 60-4500 rpm.
Spindle motor: 7.5 hp.
4. Feed:
Cutting federate (x-y-z): 4 min.
Rapid traverse (x-y-z): 10 m/min.
Feed motor torgue (x-y-z): 12 nm.
5. Accuracy:
Positioning repeatability: ±0.003 mm (±0.0001"/12").
Positioning: ±0.005 mm (±0.002"/12").
6. Automatic tool changer:
Machine weight: 4000 kg.
Air required: 6 kg/cm (85 psi).
Power required: 12 kva.
Floor space (l x w x h): 200 x 300 x 250 cm.
Automatic tool changer: n/a.
Taiwan
