| MODEL | UNIT | MCV-1890 |
| 3 Ases Box Ways |
| TABLE | Working surface | mm | 900 x 2000 |
| T-Slots (size x number) | mm | 22 x 5 |
| Max. table load | kg | 1600 |
| Distance from table work surface to floor | mm | 1050 |
| TRAVEL | Longitudinal travel (X) | mm | 1800 |
| Cross travel (Y) | mm | 900 |
| Vertical travel (Z) | mm | 650 (Belt) / 650 (Gear) |
| Distance from spindle nose to table | mm | 172-820 (Belt) / 240-890 (Gear) |
| Distance from spindle center to column surface | mm | 950 |
| SPINDLE | Spindle taper | | BT50 |
| Spindle speeds | rpm | 6000 (Belt) / 4500 (Gear) |
| Spindle speed range | | 1 (Belt) / 2 (Gear) |
| Spindle cooling / lubrication method | Oil / Grease | C04PT |
| Gear box | | Gear SHC-027X (60L) |
| FEED | Cutting feed | mm/min | 1 ~ 10000 |
| Rapid feed (X/Y/Z) | m/min | 2012/12/12 |
| Min. cutting feed | mm | 0.001 |
| MOTOR | Spindle motor | kw | 15 / 18.5 |
| 3-Axes motor (X/Y/Z) | kw | 2007/7/7 |
| Coolant pump | kw | 1.64 |
| Water tank capacity | m3 | 0.38 |
| AUTOMATIC TOOL CHANGER | ATC type | | Arm |
| Tool shank | | BT50 |
| Tool storage capacity | | 20 / 24 |
| Max. tool (diameter x length) | | Ø110 x 300 |
| INSTALLATION REGUIREMENT | Power | KVA | 45 |
| Pneumatic pressure | kg/cm2 | 5 ~ 7 |
| Pneumatic flowrate | I/min | 100 |
| Floor space | mm | 4900 x 3100 x 3350 |
Note: Dute to continuous research and development, the machine design and specifications are subject to change without prior notice.
Taiwan
