1. Table:
(1) Working surface:
a. 1300 x 300mm.
b. (Optional) 1500 x 300mm.
(2) Travel longitudinal x cross x vertical:
a. 950 x 320 x 470mm.
b. (Optional) 1050 x 320 x 470mm.
(3) T-slot (wide x no.x pitch): 16mm x 3 x 70mm.
(4) Feeds 12 steps:
a. Longitudinal x cross (60Hz): 13~621mm/min.
b. Longitudinal x cross (50Hz): 11~517mm/min.
c. Vertical (60Hz): 7~361mm/min.
d. Vertical (50Hz): 6~263mm/min.
(5) Rapid traverse:
a. Longitudinal x cross (60Hz): 2960mm/min.
b. Longitudinal x cross (50Hz): 2467mm/min.
c. Vertical (60Hz): 1520mm/min.
d. Vertical (50Hz): 1267mm/min.
(6) Swivel table (left & right): optional.
2. Vertical spindle:
(1) Spindle nose: ISO R297 No.40.
(2) Spindle speed: (60Hz): 40~4000 rpm..
(3) Change of spindle speed: Infinitely variable.
(4) Quill feeds: 0.048, 0.096, 0.192mm/rev.
(5) Quill travel: 130mm.
(6) Swiveling angle of head (left & right): 45 deg.
(7) Cross travel ram: 510mm.
(8) Horizontal rotating angle of ram: 360 deg.
1. Horizontal spindle:
(1) Spindle nose: ISO R297 No.40.
(2) Spindle speed: 45~1700 rpm
(3) Distance from center of spindle to overarm: 182mm.
(4) Distance from center of spindle to table: 22~492mm.
2. Motors:
(1) For vertical spindle: AC 3.7kW -4P.
(2) For horizontal spindle: AC 3.7kW -4P.
(3) For table feed and rapid traverse: AC 2.2kW -4P.
(4) For cutting fluid pump: AC 0.1kW -2P.
3. Machine size:
(1) Floor space: 670mm x 1200mm.
(2) Overal height: 2560mm.
(3) Net weight (Approx.): 2650 kg.
Taiwan
