1. Workhead.
2. Left-hand tailstock.
3. Right-hand tailsock.
4. Diamond dresserholder.
5. Wheel guard.
6. Wheel guard holder(long)
7. Wheel guard holder (short).
8. Universal tooth rest plate and blade holder extension.
9. Center gauage.
10. Collet wrench.
11. Plain tooth rest holder(with offset blade)
12. Ejector rod.
13. T-wrench for grinding wheel sleeve.
14. Sleeve extracting bar.
15. Pin wrench.
16. Micrometer adjustable toothrest(with round top blade).
17. Levelling pads(3 pcs).
18. Touch-up paint.
19. Plain tooth rest holder(withoffset blade).
20. Reducing collet B & S No.12xNo.10(or MT No.5 x No.4).
21. Reducing collet B & S No.12xNo.9 (or MT No.5 x No.3).
22. Reducing collet B & S No.12xNo.7 (or MT No.5 x No.2).
23. Grinding wheel(6〞x3/4〞x1 1/4〞).
24. Grinding wheel(6〞x1/2〞x1 1/4〞).
25. Grinding wheel(3〞x1/2〞x1 1/2〞x1 1/4〞).
26. Grinding wheel(4〞x1/16〞x1/2〞).
27. Grinding wheel(5〞x1 1/2〞x1 1/4〞).
28. Grinding wheel(3〞x1/2〞x 1/2〞).
29. Double end wrench.
30. Nut wrench.
31. Driver.
32. Nut wrench.
33. Allen type wrench.
34. Washer for 1/8〞dia.grinding wheel.
35. Center for workhead spindle B & S No.7(or MT No.2).
36. 4〞spindle extension.
37. 4〞extension wheel sleeve and collar.
38. Belt for spindle drive(Poly-flex belt).
39. Draw-in bolt for workhead and washer.
40. Tool cabinet.
41. Extension and washers of slit-saw and side-mill cutters.
1. Swing over table: 250mm.
2. Distance between centers: 700mm.
3. Distance between tailstock & workhead: 580mm.
4. Taper hole in workhead spindle: MT#5 and ASA #50.
5. Working surface: 135mm X 940 mm.
6. Longitudinal movement of table: 400mm.
7. Cross movement of saddle: 250mm.
8. Vertical movement of wheel head: 250mm.
9. Wheel head swivels: 360°.
10. Main motor: 0.75Kw(1Kp)2 poles.
11. Wheel head spindle speed: 2600/3700/6200 rpm.
12. Machine weight: 900Kgs.
Taiwan
