1. Standard accessories:
(1) Built–in spindle.
(2) Full cover.
(3) Blowing device for spindle.
(4) Spindle coolant system.
(5) Auto. lubrication system.
(6) Cutting oil coolant device.
(7) Water gun, side–way air blower, work lamp.
(8) Hand-on type operation box / 26pin hand wheel.
(9) Rs232 9pin interface.
(10) Rs232 + transformer wire.
(11) Heating box.
(12) Auto. power of system + alarm lamp.
(13) Basis bolt and adjusting screw.
(14) Toolbox: operation manual/maintenance manual.
(15) High speed high accuracy function ftp system.
2. Optional accessories:
(1) Spindle: 20000/30000rpm.
(2) Auto. chip conveyer.
(3) Oil separation.
1. Control: (1) CNC control: INTEK 650. (2) Spindle motor 30min/rpm: 11KW (15KW, 18KW). (3) Motor of three axis: 3.5/3.5 x 2/3.5 KW with break. (4) Taper of spindle: BT40 (HSK-A63, HSK-E50). 2. Spindle: (1) Spindle drive: built-in. (2) Spindle speed: 15000 (2000, 30000)0 RPM. (3) Table size: 1100 x 900 mm. 3. Table: (1) T-slot (width*No.*pitch): T16 mm. (2) Table load: 1500kg. 4. Travels: (1) Travel for X x Y x Z axis: 1000 x 800 x 500 mm. (2) Distance from spindle nose to work table: 150-650 mm. (3) Center of spindle to z-axis slide-way: 310 mm. 5. Feed rates: (1) Rapid feed rate: 20000 Mm/min. (2) Circle cutting accuracy: 0.01 mm. (3) Cutting feed rate: 10000 mm/min. (4) Min. resolution: 0.001 mm. 6. Tool: (1) Max. tool length (diameter): 200 (32) mm. (2) Max. tool weight: 4kg. (3) ATC tool magazine (arm–less type): 20(24option) T. 7. Power sources: (1) Spindle coolant-power/ oil capacity: 750 watt/ 8 liter. (2) Auto. Lubrication system –power/ oil capacity: 220 watt/ 2 liter. (3) Heating system/ hose: 40 x 2 watt. (4) Capacity of cutting fluid box: 180 L. (5) Compressed air supply: 6 kg/cm2. (6) Power: 25kw. 8. Weight: (1) Machine net weight: 9300kg. (2) Machine gross weight: 9950kg. 9. Machine size: (1) Packing size (L x W x H): 3215 x 2280 x 2500 cm. (2) Floor space of machine (L x W x H)): 3330 x 4110 x 3020 cm.
Taiwan
