1. Standard accessories:
(1) Built–in spindle.
(2) Full cover.
(3) Blowing device for spindle.
(4) Spindle coolant system.
(5) Auto. lubrication system.
(6) Cutting oil coolant device.
(7) Water gun, side–way air blower, work lamp.
(8) Hand-on type operation box/ 26 pin hand wheel.
(9) RS232 9 pin interface.
(10) RS232 + transformer wire.
(11) Heating box.
(12) Auto. power of system + alarm lamp.
(13) Basis bolt and adjusting screw.
(14) Toolbox: operation manual/maintenance manual.
(15) High speed high accuracy function FTP system.
2. Optional accessories
(1) Auto. chip conveyer.
(2) Oil separation.
1. Control: (1) CNC control: INTEK 650. (2) Spindle motor 30min/rpm: 4.6KW(built-in). (3) Motor of three axis: 1.5/1.5/1.5 KW with break. (4) Taper of spindle: BT30. 2. Spindle: (1) Spindle drive: built-in. (2) Spindle speed: 18000/24000 RPM. (3) Table size: 550 x 470 mm. 3. Table: (1) T-slot (width*No.*pitch): T12 mm. (2) Table load: 200kg. (3) Travel for X x Y x Z axis: 500 x 400 x 300 mm. 4. Travels: (1) Distance from spindle nose to work table: 150-450 mm. (2) Center of spindle to z-axis slide-way: 245 mm. (3) Distance of slide-way for X.Y.Z axis: 300/300/230 mm. (4) Rapid feed rate: 15000 Mm/min. (5) Circle cutting accuracy: 0.01 mm. (6) Cutting feed rate: 6000 mm/min. 5. Feed rates: (1) Min. resolution: 0.001mm. (2) Max. tool length (diameter): 150 (40)mm. (3) Max. tool weight: 1.5kg. 6. Tool: (1) ATC tool magazine (arm–less type): 8/(16 option) T. (2) Spindle coolant-power/oil capacity: 220 watt/ 2 liter. (3) Auto. Lubrication system –power/ oil capacity: 220 watt/ 2 liter. 7. Motor power sources: (1) Heating system/ hose: 40 x 2 watt. (2) Capacity of cutting fluid box: 120 L. (3) Compressed air supply: 6 kg/cm2. (4) Power: 10 kVA. (5) Machine net weight: 3500kg. (6) Machine gross weight: 4200kg. 8. Machine size: (1) Packing size (L x W x H): 180 x 200 x 240 cm. (2) Floor space of machine (L x W x H) ): 200 x 250 x 260 cm.
Taiwan
