1. Features:
(1) All castings are properly stabilized and stress relieved.
(2) Bed ways are hardened and ground to min. HS-70.
(3) Turcite B coating between the bed and carriage.
(4) Extremely low noise level.
(5) Foot brake pedal provided.
(6) Built-in coolant pump and fitting provided.
(7) CSS (constant surface speed control) on request for E.V.S. model
(8) Wider bed way which give absorbs vibration.
2. Headstock:
(1) Housing is vibration-absorbent, deflection-free.
(2) Gears are hardened and MAAG or REISHAUER ground.
3. Gear box:
Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.
4. Apron:
(1) R/H or L/H wheel can be available on request.
(2) Integrated automatic control for longitudinal and cross feeds, forward and reverse feeds.
5. Carriage & slide:
(1) Anti-Float design backlash eliminator fitted in cross slide nut.
(2) Safety clutch at feed shaft.
(3) Oneshot lubrication in carriage and top slide.
(4) Dual dials supply inchsystem screw.
(5) Metric dial supply metric system only.
6. Heavy duty spindle:
(1) Proven design of same models but with big spindle bore (80mm) to offer you more efficient, durable operation.
(2) Spindle machined from forged alloy steel, hardened, ground and treated by dynamically balanced.
(3) The spindle is supported at three-point by high precision taper roller and ball bearings keeps rigid, high accuracy.
7. Safety features:
(1) Nylon safety gears in end train.
(2) Shear pin in leadscrew.
1. Standard accessories: (1) Backplate for 10" chuck. (2) Dead center MT.5. (3) Dead center MT.4 with carbide tip. (4) Spindle center sleeve: Ø85mm Taper 1/19.18. (5) Level pads: 6 pcs. (6) Tool set and box. (7) Operation manual and parts list. 2. Optional accessories: (1) 3-Jaws scroll 10" chuck. (2) 4-Jaws independent 10" chuck. (3) 5C collet closer attachment. (4) 5C collets (metric or inch). (5) Driving plate with dog. (6) Chuck safety guard. (7) Hydraulic copying attachment. (8) Tool post grinder attachment. (9) Taper turning attachment. (10) Electrical system for CE. (11) Protect cover on leadscrew for CE. (12) Steady rest w/ball bearing. (13) Follow rest w/bronze tip. (14) Faceplate 12". (15) Drill chuck and arbor. (16) Rotating center MT.4. (17) Halogen lamp. (18) Quick change tool post. (19) Carriage micro stop set. (20) Digital read out system. (21) Full length splash guard. 3. Please refer to the attached file for the specification details.
Taiwan
