Contact us
| Company Name : | Huen Chen Machinery Co., Ltd. |
|---|---|
| Contact Person : | Mr. Liu ![]() |
| Address : | No.161, Lane 1550, Feng Chou Rd., Hsi Ch |
| Country : | Taiwan |
| Telephone : | 886-4-25615828 |
| Fax : | 886-4-25615366 |
Application: for punching of various shapes of holes (e.g. round, oblong, square & etc.) on papers, plastic or leather for binding with spiral, comb, computer or loose leaf binders. Tooling is available on request.
1. Model: HC-8HB-100. 2. Max. blank blank diameter: 10mm. 3. Max. blank length: 100mm. 4. Stroke: 160mm. 5. Capacity: 70 Pec / Per Minute.
1. Throat depth: 120 mm. 2. Drilling diameter: 3-10 mm. 3. Minimum distance between holes: 40 mm. 4. Maximum distance between holes: 260 mm. 5. Motor: 1/2 HP x 2, 1 HP.
1. Edge protector forming and assembling machine. 2. Application: employs tin sheet coil for automatic corner guarding. Fast operation and elegant outlook. It saves 60% cost than the conventional models.
1. Model: HC-316A. 2. Throat depth: 120 mm.
1. This machine is designed for setting eyelets on file holders. Provided with twin, triple, and quadruple holes riveting models for choice. 2. Specially designed intermittent running, motor does not run until riveting operation is being ...
This machine is designed for setting eyelets on file holders. machine activating is by air operation, running at very low noise level, and simple constructed throughout. Provided with twin triple and quadruple holes riveting models for choice. ...
1. Application: for riveting twin holes mechanisms. (e.g. wire clips, punch less clips, loose leaf & etc.) 2. Designed for 2-hold riveting at one action. 3. Adjustable head distance.
1. This machine is designed for setting eyelets on file holders. Provided with twin, triple, and quadruple holes riveting models for choice. 2. Specially designed intermittent running, motor does not run until riveting operation is being ...
1. Application: For riveting twin holes mechanisms. (e.g. wire clips, punch less clips, loose leaf & etc.) 2. Designed for 2-hold riveting at one action. 3. Adjustable head distance.
| Company Name : | Huen Chen Machinery Co., Ltd. |
|---|---|
| Contact Person : | Mr. Liu ![]() |
| Address : | No.161, Lane 1550, Feng Chou Rd., Hsi Ch |
| Country : | Taiwan |
| Telephone : | 886-4-25615828 |
| Fax : | 886-4-25615366 |