Shin I Machinery Works Co., Ltd.

All Products

16 Product(s) found

Automatic Irregular Can End Lining Machines With Drying Machines

Model : S-A17A

1. Witch 2 sets mechanicalc lining gun for end compound lining. easy volumn adjusting. 2. Drying oven is vertical design, hence save space. 3. Safety devices provided to ensure M/C running safely. 4. Auto temperature controller enable to adjust ...

Three Rolling Machines ( Can Making Machines)

Model : S-A3

1. machine type: S-A6. 2. Range of can dia.: 202 - 401D. 3. Range of can height: 48 - 125mm. 4. Capacity per min.: Up to 200 CPM.

Automatic Inside Spray Machine

Model : S-B53D

S-B53D Automatic Inside Spray machine (Two stations) is built for three piece tin can production.. One side sealed can bodies are fed into from two top can chutes, carried into two spraying stations by two timing screw and turrets. Two sets of ...

Automatic Vacuum Fillers ( Automation Machines)

Model : S-C7-18V

1. Less floor space required than gravity type filler. 2. With trap tank which has purpose of retaining and transferring surplus fluid from the vacuum chamber to the liquid tank. 3. Prevent fluid from sucking into the vacuum chamber. 4. With no ...

Automatic Soft Drink And Beer Fillers ( Automatic Filling Machines)

Model : S-C7-40C

1. Liquid is filled by pressure. 2. Suitable for carbonated soft drink and beer filling. 3. Can be connected with seamer S-B15 or S-B45. 4. Precise filling valve is mode of stainless steel, easy for cleaning and maintenance. 5. CIP ...

Automatic Feeding Machines

Model : S-B23B

1. Easy for maintenance and adjustment. 2. Multi-safety design to insure machine and personnel safety. 3. Roller table use drive reducer suitable for one operator serves multi feeders. 4. Tinplate (or aluminum) sheet is carry up by three suction ...

Automatic Scoring Machines

Model : S-B24A

S-B24A Automatic Scoring machine is designed for can body blank scoring. Blanks are stacked on the feeding magazine, and separated by a tiny gear rail and air blowing. An procating feeding finger push each blank into scoring station, blank is ...

Automatic Can Body Separators ( Automated Machines)

Model : S-B25S

S-B25S Automatic Can Body Separator horizontal design. Sored can cylinder is carried by a timing screw and a turret. Inner cutter shaft enter can inside and carry cans forward to meet an arc outer rail blade. Cutter edge squeeze the scoring line ...

Automatic Vertical Flanging Machines

Model : S-B42V

S-B42V Automatic Vertical Square Can Flanger with vertical design. Expanded can is carried into an index turret by a chain pusher. Can is flanged by a pair of squeeze flanging die. Flanged can is carried out by the index turret and is pushed ...

Automatic Vertical Beading Machines

Model : S-B17VBS

S-B17VBS Automatic Vertical Beading machine is specially designed to make a single bead on the two piece can body wall near can bottom. Trimmed can body (open side face down) is carried by a timing screw and a turret to let beading roller enter ...

1 2 Next »

Contact us

Company Name :	Shin I Machinery Works Co., Ltd.
Contact Person :	Mr. H.H. Lin
Address :	No. 43, Chung Cheng St., Chingshui Dist.
Country :	Taiwan
Telephone :	886-4-26238181
Fax :	886-4-26232129