1. This series are suitable to produce non-inductive foil /polyester film or polypropylene film capacitors.
2. It could be dual winding or series type of high voltage capacitors.
IPC 486computer control system, the circuit clear, full function, it can store 600 sets different winding specification, if winding materials are the same, changing spec. only needs 2 seconds.
3. The input and output use the electronic switch, the rate of break-down is very low.
4. Main winding uses servo motor control, winding speed stable, long life.
5. One set of winding mandrel, which easy to change specification and maintenance. The capacitance different tolerance will be very small.
6. The inside and outside seals both use the digit display PID control. The products have good appearance.
7. The DC servo motor control tension of 8 material feeding, ensure the element quality stable.
1. Element dia.: max.f35mm.
2. Size:
(1) Width: max.40mm x 2
(1) Length: max.80mm x 1.
3. Mandrel: f4, 5, 6, 8mm.
4. Effective mandrel: 90mm.
5. Number of reel: 10 Reels.
6. Foil:
(1) Width: max.38mm x 2.
(2) Max.78mm x 1
(3) Thickness: 5 ~10um.
(4) ID: 40mm.
(5) OD: 150mm.
7. Film:
(1) Width: max.38mm x 2.
(2) Max.78mm x 1
(3) Thickness: min. 3.5um.
(4) ID: 40mm.
(5) OD: 160mm.
8. Suitable specification: larger & series.
9. Tension control: AC servo motor.
10. Seal system: digit display, PID control ± 1%.
11. Winding turns: max. 9999.
12. Cutting foil: perforation.
13. Winding speed: max. 4500 R.P.M.
14. Power source: AC220V 50/60Hz 1f 2.5KVA.
15. Air pressure: 5Kg/cm2.
16. Machine dimension: W 1200mm x D 950mm x H 1780mm.
17. Machine weight: about 500 Kgs.
Taiwan
