Standard Feature:
1. Headstock oil collant system (18000BUT)
2. Turnable tailstock quill
3. Tailstock power off safety device
4. X & Y axis linear scale feed back
5. Hyrdraulic system
6. Chip conveyor chip cart
7. Cabinet refigerator
Optional Feature:
1. C axis
2. Double turret
3. Tool presetter
4. Sub spindle
5. Hydraulic steady rest
6. Manual steady rest
7. 3-jaw chuck
8. Power chuck
9. Finger chuck
10. Tool holder
| Specification | BMT 35 SA | BMT 40 SA | BMT 45 SA |
| Swing over bed | 890mm | 1020mm | 1145mm |
| Distance between centers | 700/1200/1700/2200/3200/4200/5200mm |
| Spindle nose | A2-11 A2-15 A2-15 A2-20 A2-20 A2-28 A2-28 A2-32 |
| Spindle bore | 153mm 230mm 255mm 318mm 360mm 410mm 535mm 610mm |
| Spindle speed | 1 range | 20~140RPM 16~120RPM 13~95RPM 14~100RPM 12~85RPM 10~75RPM 8~60RPM 4~25RPM |
| | 2 range | 38~280RPM 30~200RPM 25~185RPM 26~180RPM 23~160RPM 18~110RPM 15~95RPM 8~50RPM |
| | 3 range | 95~550RPM 70~420RPM 60~400RPM 60~350RPM 55~300RPM 45~250RPM 35~200RPM 20~140RPM |
| | 4 range | 200~1200RPM 150~700RPM 120~600RPM 130~450RPM 65~350RPM 95~400RPM 55~300RPM 40~220RPM |
| Spindle motor | 37/45kw (50/60HP) |
| Bed width. Slant angle | 1430mm. 60degrees |
Taiwan
