The Single tool Holder is mounted directly to the CHR-68 turret. The single tool holder takes one standard 10mm square tool bit. The tool holder body is made of hardened steel.
The Double tool Holder is mounted directly to the CHR-68 turret The double tool holder takes two standard 10mm square tool bits. The tool holder body is made of hardened steel.
The triple tool holder fits directly to the turret and is used to hold three standard 10mm square tool bits or for spacing two tools. The tool holder body is made of hardened steel.
The boring tool holder is for direct application to the eight station turret. It is used for holding 20mm diameter boring bars, turning tools or split bushings. The body of the boring tool holder is made of hardened steel. Specify 12mm or ...
The adjustable tool holder permits setting of center drills, drills, reamers and other end-working tools to the exact center of workpiece. The holder is mounted directly to the eight station turret and holds 5/8" diameter tool shanks or bushings ...
Extension tool Holders are used for turning or, with optional holders, for boring knurling or cutoff. Extension tool Holders are available in four Sizes 5mm, 75mm;, 100mm and 125mm lengths (measured from centerline of T-bolts to extension end of ...
This tool holder has an opening 11mm x 54mm, permitting the use of standard 3/8" square tool bits in any multiple tool capacity. By using the under-cutting, chamfering and grooving can be done in one operation. When ordering, specify ...
This tool holder center high is 10mm, can choose Right or Left hand tool holder.
The hardened steel holders mount directly to eight station turret. Boring tools align to center line height of 90ยบ degree slot. Specify 12mm or 3/8" or 1/2" tool slide center height when ordering.
The hardened steel holders mount directly to eight station turret. They are used for holding drills directly or with split bushings, or for holding any of the 5/8" round shank turret tooling.
| Company Name : | Cyclematic Machinery Co., Ltd. |
|---|---|
| Contact Person : | Mr. Edward Chang  |
| Address : | No. 20, Lane 50, Ming Shen Rd., Shen Kan |
| Country : |  Taiwan |
| Telephone : | 886-4-25625393 |
